Introduction

Here's how to clean clogged lawn sprinklers using special cleaners that dissolve rust and mineral build-ups.

Clean Clogged Sprinklers

If you have a lot of iron or other minerals in your water, then you likely know how much of a problem they can create. Iron builds up on the working parts and in the holes of sprinklers, which over time can make them quit working altogether. Here’s the good news: a simple soaking in a rust-removing solution followed by a spritz of silicone lubricant is all it takes to rejuvenate your sprinkler.

Tools Required

  • Brass Bristle Brush

Materials Required

  • Rust and mineral remover
  • Spray silicone

Project step-by-step (2)

Step 1

Soak Sprinklers in Rust Remover

Fill a freezer bag half full of rust remover and drop your sprinkler into the bag. We used CLR Calcium, Lime, and Rust Remover, but other rust-removing solutions will also work. Swish it around occasionally to distribute the solution. Remove the sprinkler after 30 minutes and rinse it in clear water.

Fh10nov 513 06 051Family Handyman

Step 2

Spray With Silicone

Clean off any remaining mineral or rust buildup with a brass-bristle brush. Spray silicone on the cleaned-up sprinkler to lubricate the parts and to prevent iron and mineral buildup.

Fh10nov 513 06 061Family Handyman