Time

1 - 2 hours

Complexity

Beginner

Cost

$20-$40

Introduction

Maybe you don't bother to keep your grill clean because you like the taste of old gristle on your BBQed steak, but if so, you're in the minority. Most people would agree with expert grill master Leroy Hite: "Dirt, ash and charred debris not only affect your grill's aesthetics, they can affect the flavor of your food."

In other words, the less gristle, the better — and that means you need a clean grill.

Cleaning your grill isn't a job you should only do once or twice during the season. "The biggest mistake people make when cleaning grills is inconsistency," says David "Chef Fig" Figueroa. "You've got to clean those grates after each cook and even give them a quick touch-up before grilling."

Besides chefs like Hite and Figuero, we checked in with a pair of cleaning experts to get grill cleaning tips that everyone can use to make their cookouts that much more tasty and enjoyable. Most agreed on the basics, but chef and social media personality Gary Marandola offered a tip that can make the whole process easier and faster.

Tools Required

  • Flexible work gloves
  • Headlamp
  • Large garbage can
  • Shop vacuum
  • Spray Bottle
  • Stiff putty knife
  • Tarp
  • Two clean wire brushes

Materials Required

  • Degreaser
  • Dish soap
  • Disposable shop towels

Project step-by-step (9)

Step 1

Prepare the grill for cleaning

“I always start with heating them up as high as the grill allows, and leave the grill shut until it stops smoking. That’ll turn everything organic in that grill into carbon.” Carbon is basically soot, and it’s a whole lot easier to scrape off than hardened grease.

It goes without saying that you need to turn off the gas and let the grill cool down before you do any cleaning. Once it’s cool:

  • Put on some protective, flexible gloves.
  • Roll your grill onto a medium-sized tarp if you don’t want debris getting on the ground.
  • Open the lid and remove the grates, then lay them across a large garbage can.

“Pulling out the grates and burner covers is the most difficult part of the job,” cautions cleaning expert Ken Doty. After that, “everything is straightforward.”

Prepare Grill For CleaningRobert Maxwell for Family Handyman

Step 2

Spray the inside of the cook box with soapy water

The next step, according to the chefs as well as cleaning experts Doty and Ross Pascale, is to spray the inside of the cook box with soapy water.

  • Fill a spray bottle with a 10-to-one solution of water and dish soap.
  • Spray the solution liberally on all parts of the cook box.
  • While the soapy water is working, scrape the flavorizer bars (if your grill has them) with a stiff metal putty knife. Be sure to remove as much debris as possible. If you followed Marandola’s advice and pre-heated the grill, this should be easy.

Cleaning grillSteve Maxwell for Family Handyman

Step 3

Scrub and vacuum the cook box

Now that the soapy water has done its job, you can clean the inside of the cookbox:

  • Remove the flavorizer bars and set them to one side.
  • Scrub all inside surfaces of the upper half of the cook box with a wire brush. “If you discover any stubborn debris that doesn’t want to come off,” advises Hite, “use the scraper tool at the end of the wire brush.” You can also use your putty knife.
  • Remove all loose debris from the bottom of the cook box with a shop vacuum. Use a crevice tool to reach between the burner tubes.

Pro tip: If you’re not working in a well-lit area, ensure you get everything by using a headlamp to illuminate the inside of the cook box.

Vacuum Cook BoxRobert Maxwell for Family Handyman

Step 4

Brush the burner tubes and remove them

Gas burner tubes are hollow and open-ended, and most are removable, so you’ll want to remove them from the grill to make it easier to clean the inside. But it’s a good idea to remove as much soot and grease as possible while they’re still in place.

  • Brush the tubes individually with a clean wire brush. Be sure to brush across the tubes rather than along their length to avoid getting debris inside the tubes.
  • Remove each tube after you’ve brushed it. Hite recommends cleaning it with soapy water.
  • Once all the burners and flavorizer bars are removed and you have clear access to the bottom of the cookbox, scrape off hardened debris with a wire brush or putty knife and vacuum up the scrapings with a shop vac.

Brush Burner TubesRobert Maxwell for Family HandymanRobert Maxwell for Family Handyman

Step 5

Clean the grates

With one of the grates placed on a garbage can, you can brush debris off using a wire brush or scrape it off with a putty knife, and everything will fall into the can. Don’t scrape or brush your grill with metal tools if it’s porcelain or enameled, because that could damage it. Use a wooden spatula and non-metal scrubber instead.

  • Brush and scrape the top side of the grate, then turn it over and do the same to the other side. Repeat the procedure for each grate you have to clean.
  • Remove heavy grime with a degreaser. Commercial degreasers work best, but if you don’t have any, Pascale recommends a mixture of baking soda and water. Spray both sides of the grate and wait a few minutes for the solution to work.
  • Wipe down each grate with a disposable shop towel.

Brush Burner TubesRobert Maxwell for Family HandymanRobert Maxwell for Family Handyman

Step 6

Clean the grease tray

“Don’t forget to clean the interior walls and drip pans to prevent grease buildup,” advises Pascale.

  • Open the grill’s lower doors and remove the grease collection tray.
  • Scrape all debris collected by the tray into your garbage can.
  • Spray the tray with grill cleaner or soapy water. Hite recommends Dawn Platinum dish soap.
  • Wipe away all grease and remaining debris with a fresh shop towel.

Clean Grease TrayRobert Maxwell for Family Handyman

Step 7

Clean the grill cabinet

“Dirt or grime on the outside of your grill encourages rust to settle in,” warns Hite. He recommends doing the following before you put the grill back together:

  • Spray the grill with the same cleaner or soapy water you used for the inside.
  • Wipe it down with a clean washcloth.
  • Dry with a separate, clean washcloth.
  • Remove all the control knobs and clean them separately with soapy water.

Clean Grill CabinetRobert Maxwell for Family Handyman

Step 8

Put the grill back together and season the grate

  • After everything has dried, check each igniter to make sure it sparks when you turn the control handle.
  • Reassemble the grill, putting the grease tray, burner tubes, flavorizer bars and grates back in place.

Pro tip: If you have cast iron grates, Chef Fig recommends seasoning them, just as you would a cast iron skillet. “I apply oil on both sides of the grates, place them back on the grill, crank up the heat, and season those buggers to perfection.”

Inspect BurnersRobert Maxwell for Family Handyman

Step 9

About the Experts

  • David “Chef Fig” Figueroa is the President and Co-Founder of Melinda’s Foods. He is the company’s chef and pit master.
  • Leroy Hite is the founder and CEO of Cutting Edge Firewood. He is an expert on the best woods to use to bring out the flavor in the food you’re grilling.
  • Gary Marandola is a BBQ Chef and Next Level Chef contestant who shares his cooking insights on social media as garythebbqchef.
  • Ross Pascale is the owner of Neeet House Cleaning service in Melbourne, Australia.
  • Ken Doty is a cleaning expert and Chief Operating Officer at The Maids International.